Safety Mat - ESD Mat
Safety Mat - ESD Mat ESD Safety Mat Malaysia, Penang Supplier, Suppliers, Supply, Supplies | YGGS World Sdn Bhd

YGGS World Sdn. Bhd.
[ 200801039881 (841230-U) ]

ESD360S ESD Table Mat
ESD390S ESD Table Mat
ESD3100S ESD Table Mat
ESD3120S ESD Table Mat


ESD Control Table Mat  ESD Mat  ESD Rubber Mat  Anti Static Mat  Anti Static Rubber Mat
Static Dissipative Mat  ESD Green Mat  Static Dissipative Table Mat  ESD Static Dissipative Mat


~ Roll Form 


ESD Mat - Ecoformat

Ecoformat - ESD360S / ESD390S / ESD3100S / ESD3120S ESD Rubber Mat (Anti Static Rubber Mat / Static Dissipative Mat )
was test under by SGS, complied and passed under below requirement.

1) ROHS 2015/863/EC - Restricted of Hazardous Substance for electrical and electronic requirement control of
                                   Cadmium, Lead, Mercury, Chromium 6, PBB & PBDE that not exceed limit of 0.1%.
2) IEC 61340-2-3 Electrostatic Test - Resistance and resistivity of solid materials used to avoid electrostatic charge accumulation.

SGS TEST CERTIFICATES (3nos) :
* SGS is the world's leading inspection, verification, testing and certification company.
   SGS is recognized as the global benchmark for quality and integrity.
1) CRSSA/ 190819090-CA18138 , CRSSA/ 191125006-CA24158
2) SZIN1909012996PS , SZIN1910015589PS
3) SZIN1910015590PS

ESD Control Table Mat, which is made of two layer ( Static - Dissipate & Conductive ), will protect the hazard of static electricity having
   origin in maintenance electric potential difference at zero volt between one's body and a mat as well as device sensitive static electricity.
ESD Green Mat has a static dissipative top layer ( Green ) which provide static free surface meanwhile
   the bottom layer ( Black ) is a conductive layer which allow static charges to be drained away effectively.
These anti static mat can be layed on floor or table top. These mats are specially manufactured with controlled low resistance.

Common Application :  Place of production made of semiconductor (VLSI, C-MOS, and so on)    Electronic manufacturing, repairing and soldering
                                Machinery room equipped with office automation    Area of an electronic exchanger    Scientific establishment
                                 Clean room environment    Chemical Laboratory    Medical assembly    Aerospace    Hospitals

 

 

Material

PVC, Natural Rubber (NR)

Thickness

2±0.1mm

Hardness

65±5 Shore-A

Tensile Strength

5 Mpa

Elongation

300%

Density

1.45g/cm3

Surface Resistivity

Top Layer - 106-8Ohms/Square

Bottom Layer - 103-5Ohms/Square

Static Decay 5kv-0v

Less Than 0.1 Second

Resistance to Ground

Less Than 108Ohms/Square

Size (Roll Form)

60cm x 10m x 2mm

90cm x 10m x 2mm

100cm x 10m x 2mm

120cm x 10m x 2mm

Colour

Green Black (Shining Surface)

  

Handling and Storage: 
 Safety Handling Method: Please treat ESD Mat in where there is no igniting agent.
 Storage Method: Please storage separating from water, strong oxidizing & chemical agents.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version